الوصف

Read before you buy:

This is the electroplating vinyl film, it has some electroplating process on the the surface, you may think it is scratches. but it is not scratches.

Not extendable! Not stretchable at all!! please notice!!

This kind of plated film is not soft and a little rigid。Because the plating layer is very thick, it cannot be stretched well. So when you paste, you should apply it with water, bend the position, and heat the paste a little.

Need to spray water on the object, then apply the vinyl to the object. The back glue will be more and more sticky with using water. After stick on film, please wait almost a day for the water and glue to dry. you can check the adhesion.

This kind of plating film is very difficult to install and takes more time than ordinary films.

Notice: When you touch the film back liner, you don’t feel sticky to the touch, because the film is made of good quality low-viscosity glue. Low-viscosity glue is more expensive. When apply to a low-viscosity film, you need to spray water on the surface first, and then attach the film. The glue gets to the water, the sticky of film, tighter and tighter it will be.On the contrary, if you feel that the film is very sticky to the touch, the film is made with ordinary glue, and the film will lift up after a period of time.

Long lasting for approximately 10 years indoor use and 5 years outdoor use
It can also be applied onto most smooth painted or metallic surface such as cell phone, laptop, home appliances, table and even cabinet and much more.

Description:
Material: PVC
Installation Temperature: 60F to 80F (16C to 32C)
End Use Temperature: -65F to 225F (-60C to 107C)

Notes:
If you see any creases from unrolling the roll, this WOULD NOT affect the item when you apply to your car! We are not responsible for creases from unrolling the roll because that is the nature of the roll when you unroll the item or when the item rolled for too long (think about when you fold your clothes for a long time, it will have crease/wrinkles)